I installed Whonix-XFCE 184.108.40.206.3 back in August and it’s been running great until a couple weeks ago.
Now both the Gateway and Workstation boot to black screen. They start to load, and after it gets to Loading Ramdisk it goes blank.
I’m running VirtualBox 6.1.32
The Workstation is set with 16GB of the 32GB total. 2 of the 8 Processors, and 128MB Video Memory.
I tried booting with different controllers, and then I removed the controller, booted, and added the controller back.
When it came back up I was able to see something.
/dev/sda1: recovering journal
/dev/sda1: Clearing orphaned inode 6101905 (uid=1000, gif=100, mode=0100644, size=32768)
/dev/sda1: Clearing orphaned inode 6101845 (uid=1000, gif=100, mode=0100600, size=64)
/dev/sda1: clean. 710032/6553600 files
(1 of 3) A start job is running for Load AppArmor profiles (1min 1s / no limit)
[127.904066] EXT4-fs error (device sda1): __ext4_get_inode_loc:4721: inode #2884774: block 11534442: comm systemd-udevd: unable to read itable block
[127.905280] EXT4-fs error (device sda1): __ext4_find_entry:1449: inode #2884051: comm systemd-udevd: reading directory lblock 0
[127.957005] EXT4-fs (sda1): Remounting filesystem read-only
When I let it run for a while I came and it had a screen full of errors saying something like:
watchdog: BUG: soft lockup - CPU#1 stuck for 23s
Any idea what’s going on and/or how to fix?