Since I updated to the latest Whonix point release the virtual networks of my libvirt stopped working except for one.
This issue is probably unrelated to the latest Whonix update and related to some host update/issue, but I though to still post it here if someone else might experience the same troubles or knows a solution. So far I have been unsuccessful in debugging this problem.
There seems to be no internet in the Gateway, no changes have been made to the virtual networks that worked before. Now they don’t.
So far I have been unsuccessful in debugging this problem.
What have you tried so far?
Some more info about your firewaill, xmls and libvirt config would be helpful.
1 Like
So far I have been through the Troubleshooting guide on Whonix.
sudo -u clearnet UWT_DEV_PASSTHROUGH=1 curl --tlsv1.3 -H 'Host: check.torproject.org' -k https://116.202.120.181
does not work from inside the gateway.
The networking xmls are default configured as downloaded. Bridge name and ip addres are increased.
There is no libvirt.config I can find.
Can this be caused by the latest Qemu upgrades?
They’re called libvirtd.conf and qemu.conf. It’s possible that an upgrade might’ve changed a default, but unlikely to cause total failure.
This is non-whonix specific advice, but 'I’d start from the beginning. Check the routes and firewall first. Undefine/redefine, start pinging and monitoring packets from and to the network device. If that works you can move on to the Gateway.
What is your firewall setup?
1 Like